KJBP_~14588~14588~~~~~~~~(default)~0~0~0,0,0|0,0~0~sp1~~~~0~0~0~~~~~~~~~~~tableCol=1;tabBord=0;cellSpa=3;cellPad=3;tableBreak=0;imgAlign='Left';tableBrCol='';tableBgColor='';bgColorPanel='';tAlign='Left';tWidth='';cValign='';cWidth='';~0~0~First Layout Table~[~~]~[~~]~[~~]~1~~~~

0JBP_~14588~14589~%3CBR%3E%3Chr%3E%3CBR%3E%3CFONT COLOR=%27%27 SIZE=2%3ECHRISTMAS CARD IDEAS. ALL STAMPS AND PRODUCTS AVAILABLE. SEE END OF INSTRUCTIONS~~~~~~~(default)~0~0~0,0,0|0,0~0~si24~~~~0~0~0~~~~~~~~Left~~~popWin=0~-1~0~Text~[~~]~[~~]~[~~]~1~~~~

0JBP_~14588~20065~~~~~~~~(default)~0~0~0,0,0|0,0~0~si1~~~~0~0~0~~images/cardpennyblackteddyparade.jpg~~~~~~Left~~~popWin=0~-1~0~PENNY BLACK - TEAM TEDDY~[~~]~[~~]~[~~]~1~~400~400~

0JBP_~14588~20067~%3CBR%3EALL ITEMS TO MAKE THIS CARD ARE CURRENTLY AVAILABLE IN THE SHOP - CALL 01332 572904%3CBR%3E%3CBR%3E%3CBR%3E1. To make the card take a 6 x12 piece of dotted swiss bazzill and cut to make 14.4cm wide, leaving the length at 12”.%3CBR%3E2. Fold over approx. 1 ¼” or approx 3cm at the end and round the corners of the folded over section. %3CBR%3E3. Take your spotted paper and cut to make a square 14.4cm (144).%3CBR%3E4. Cut a strip of spot card to 1 1/2cm or ¾” wide x 144cm in length and stamp in the centre the “have a wonderful day” sentiment.%3CBR%3E5. Stick this strip across the folded over flap and pop a silver brad at either end.%3CBR%3E6. Now you can stick the 144 square spot under the flap, this should give you your folded card after you have trimmed off the excess turq. Spot from the bottom of the card.%3CBR%3E7. Onto a piece of white card that measures 4 ¼” x 3” stamp the teddy bear holding the parcel image. Colour this in.%3CBR%3E8. Mount this onto a piece of the turq. Bazzill leaving a small border all the way around the edge. (mine measures 4 ½ x 3 ¼”).%3CBR%3E9. Stick a tab of ribbon under the right hand bottom corner and mount to the main card.%3CBR%3E10. Cut a square of white spot bazzill to measure 13.4cm x 13.4cm, round the corner to this and stamp the greeting in the middle.%3CBR%3E11. This can now be stuck into the centre of the card,%3CBR%3E12. If time, stamp the image onto some scrap white, you only need the larger butterfly. Colour in and cut out. 3D this onto the butterfly on the main card.%3CBR%3E13. Highlight your image using glitter glue.%3CBR%3E%3CBR%3E~~~~~~~(default)~0~0~0,0,0|0,0~0~si1~~~~0~0~0~~~~~~~~Left~~~popWin=0~-1~0~INSTRUCTIONS%3A~[~~]~[~~]~[~~]~1~~~~

0JBP_~14588~20068~~~~~~~~(default)~0~0~0,0,0|0,0~0~si1~~~~0~0~0~~images/cardhedgehogparcel.jpg~~~~~~Left~~~popWin=0~-1~0~PENNY BLACK - HEDGEHOG PARCEL CARD~[~~]~[~~]~[~~]~1~~400~400~

0JBP_~14588~20069~%3CBR%3E%3CBR%3E1.Make a 144 square white card.%3CBR%3E2.Stamp all the way around this with the sentiment “have a wonderful day!” with black ink.%3CBR%3E3.Cut a square of the brightest pink dotted swiss to measure 12cm square (you may have to make your slightly smaller if your stamping is not to the edge.%3CBR%3E4.Cut a piece of white card to measure 8cm square and stamp the two hedgehogs carrying the parcel. Colour these in.%3CBR%3E5.Mount the onto a piece of the paler pink bazzill leaving a border all the way around (mine measures 9cm square)%3CBR%3E6.Cut a 1” square of the lilac bazzill and cut in half, this will make to corners.%3CBR%3E7.Place the corners in place as per your image.%3CBR%3E8.Place two tabs of ribbon under the top right hand side of the panel, one pink spot and one purple spot ribbon.%3CBR%3E9.Stick this panel to the centre of your card.%3CBR%3E10.Stick a pink star gem on the two corners and embellish your card with glitter glue.%3CBR%3E~~~~~~~(default)~0~0~0,0,0|0,0~0~si1~~~~0~0~0~~~~~~~~Left~~~popWin=0~-1~0~INSTRUCTIONS~[~~]~[~~]~[~~]~1~~~~

0JBP_~14588~20070~~~~~~~~(default)~0~0~0,0,0|0,0~0~si1~~~~0~0~0~~images/CARDPENNYBLACKTEDDYPOST.jpg~~~~~~Left~~~popWin=0~-1~0~PENNY BLACK CARD - TEAM EFFORT~[~~]~[~~]~[~~]~1~~300~450~

0JBP_~14588~20071~1.Cover the front of a 7x5 card with the stripe paper.%3CBR%3E2.Cut a piece of white card to measure 3 ½” x 5” and stamp your design onto it.%3CBR%3E3.Colour your design in.%3CBR%3E4.Mount this onto a piece of the pink (reverse of the stripe) with a narrow border all the way around it. MINE MEASURES 3 ¾” x 5 ¼”%3CBR%3E5.Next mount this onto a piece of the pale aqua bazzill that leaves a small border all the way round.%3CBR%3E6.Punch a scallop oval from the same pink as before and cut it in half and stamp onto it just the “best wishes to you…..” from the sentiment stamp.%3CBR%3E7.Stick this to the panel with the stamped image on it but tuck a tab of ribbon under this as you stick it in place.%3CBR%3E8.Cut a strip of the aqua bazzill the width of the card and approx. 1.5cm wide and stick along the bottom of the card approx 1.5cm from the bottom.%3CBR%3E9.Cut another strip about the same width but 4” in length. Round the end and tie some ribbon around the other end.%3CBR%3E10.Stick this in place on the card about 1cm down from the top on the right hand side of the card,%3CBR%3E11.stick a pink star gem to the end that is rounded.%3CBR%3E12.Stick the image panel in place on the card overlapping the strip at the bottom.%3CBR%3E13.Finish with two star gems at the bottom of the card on either end of the strip and embellish the card with glitter glue.%3CBR%3E%3CBR%3E%3CBR%3E~~~~~~~(default)~0~0~0,0,0|0,0~0~si1~~~~0~0~0~~~~~~~~Left~~~popWin=0~-1~0~INSTRUCTIONS%3A~[~~]~[~~]~[~~]~1~~~~

0JBP_~14588~20023~~~~~~~~(default)~0~0~0,0,0|0,0~0~si1~~~~0~0~0~~images/pennychristmas.jpg~~~~~~Left~~~popWin=0~-1~0~Green Spot Christmas card~[~~]~[~~]~[~~]~1~~400~400~

0JBP_~14588~20022~1.Cut fold and score a card to make a 144 square card. %3CBR%3E2.Cover the front of the card with the green spot and circle patterned paper.%3CBR%3E3.Put this to one side.%3CBR%3E4.From green bazzill cut a square 12cm (12cmx 12cm or 4 7/10” square)%3CBR%3E5.From the patterned paper cut a square 11 5cm (11.5cm x 11.5cm or 4.5”square)%3CBR%3E6.Take the patterned paper square and take out the middle (9cm square).%3CBR%3E7.Take the bazzill square and take 8cm out the centre square from this. %3CBR%3E8.The patterned frame you have created should sit on top of the bazzill frame you have created leaving a small border all the way around.%3CBR%3E9.Using the final template (7.5cm square) Cut the centre out of the front of your card, Place the template in place and place the frame around it to make sure it is central before cutting. A small amount of double sided tape may help keep the template in place whilst cutting.%3CBR%3E10.Take red and green ribbon and tie in a bow on the left hand top corner of the frame before sticking down in place using 3D foam pads.%3CBR%3E11.Onto white card measuring 4cm wide x 6.3cm high (1 9/16” 2 8/16” )stamp the bird cage and the merry Christmas over the top of this, colour this in.%3CBR%3E12.Mount this onto green bazzill to leave a tiny border around the left, top and bottom, on the right leave approx 1” 2.5cm. This should give you a bazzill square 6.5cm square (2 9/16th “ square)%3CBR%3E13.Wrap a piece of green and red ribbon around the square onto the green bazzill. This should then be mounted into the centre of the aperture you have created.%3CBR%3E14.Stamp colour in and cut out the two baubles and stick them in place just under the ribbon bow you have tied. Finish off your card with either glitter glue or glossy accents.%3CBR%3E~~~~~~~(default)~0~0~0,0,0|0,0~0~si1~~~~0~0~0~~~~~~~~Left~~~popWin=0~-1~0~INSTRUCTIONS~[~~]~[~~]~[~~]~1~~~~

2JB_~14588~20024~~~9.8723~~~~~(default)~0~0~0,0,0|0,0~0~sp525~sp444~~~0~0~0~~images/pbchristmastreasures.jpg~~~~~~~~~popWin=0~-1~0~Penny Black- Christmas Treasures Clear Stamps~[~*Penny Black- Christmas Treasures Clear Stamps|pb-ctreas|9.8723|0|0||0|||1||12449|~]~[~~]~[~~]~1~~250~250~

0JBP_~14588~20025~~~~~~~~(default)~0~0~0,0,0|0,0~0~si1~~~~0~0~0~~images/3reindeer.jpg~~~~~~Left~~~popWin=0~-1~0~REINDEER CARDS - 1~[~~]~[~~]~[~~]~1~~450~350~

0JBP_~14588~20026~~~~~~~~(default)~0~0~0,0,0|0,0~0~si1~~~~0~0~0~~images/talLreindeer.jpg~~~~~~Left~~~popWin=0~-1~0~REINDEER CARDS - 2~[~~]~[~~]~[~~]~1~~225~629~

0JBP_~14588~20027~1.Cut fold and score a card to make a 7x5 card.%3CBR%3E2.From Green bazzill cut a panel 7 x 4 ( 10cm x width of the card.), this is then stuck across the centre of the card.%3CBR%3E3.From the craft bazzill cut two strips 7” x 14/16” & 7” x ½” or (2cm x width of card & 1.3cm x width of the card)%3CBR%3E4.Stick these in place across the middle of the green card.%3CBR%3E5.Stamp in the top left hand corner of the card onto the white section the “Rudolph the red nose reindeer” and in the bottom right hand corner again onto the white the “had a very…” wording.%3CBR%3E6.Inside the centre of the card stamp “ shiny nose”%3CBR%3E7.Stamp onto white card the three reindeer that you can see on the picture above.%3CBR%3E8.Colour these images in with watercolour pencils.%3CBR%3E9.Cut each of the images out leaving a tiny white border all the way around them as you cut them out.%3CBR%3E10.From red bazzill cut three panels, that measure 2” x 3 ¾” ( 5cm x 9.5cm)%3CBR%3E11.Edge each of the panels with black ink and stamp randomly little snowflakes and swirls (from the bubble tree stamp set) all over each of the panels.%3CBR%3E12.Arrange the three panels on the middle of the card so that they resemble a fan of cards (as per your picture).%3CBR%3E13.Mount the reindeer images onto these red panels, the reindeer with the Christmas lights goes in the middle. USE 3D FOAM PADS FOR THIS.%3CBR%3E14.Using 3d foam pads mount a red jelly tot onto the end of each of the craft strips.%3CBR%3E15.Finally accent your reindeer with glitter glue.%3CBR%3E~~~~~~~(default)~0~0~0,0,0|0,0~0~si1~~~~0~0~0~~~~~~~~Left~~~popWin=0~-1~0~instructions for reindeer card 1~[~~]~[~~]~[~~]~1~~~~

0JBP_~14588~20028~1.Take a dl white card and set aside.%3CBR%3E2.Cut a piece of red bazzillao that it is 3 ½” wide (9cm) x 7” (18cm), cut the bottom of ths free hand with scissors to form a wavy line. See your picture above.%3CBR%3E3.Cut a piece of craft bazzill so that it is the same width as the red bazzill you have just cut and approx 2” high ( 5cm).%3CBR%3E4.Edge both of these with black ink.%3CBR%3E5.Place the craft bazzill at the bottom of the card and place the red above this so that the wavy edge you have cut overlaps the craft bazzill.%3CBR%3E6.As your acrylic stamps are bendy bend the “Rudolph……” wording so that it goes in the same line as your wave and stamp in black, you are only stamping “Rudolph the red nose reindeer…” then onto the craft bazzill in the centre at the bottom stamp “had a very”%3CBR%3E7.Inside the card stamp “shiny nose”.%3CBR%3E8.Cut a piece of the craft bazzill out at 2 ½” x 3” (7 1/2cm x 6.3cm ) and edge this in black ink.%3CBR%3E9.Stick this to the top of the card on the right hand side, leave a tiny bit of red showing on the right.%3CBR%3E10.Stick the Gold/silver oval in place on the left of this craft panel.%3CBR%3E11.Stamp the reindeer image in the square onto white card, colour in and cut out leaving a tiny white border all the way around it.%3CBR%3E12.Mount this onto 3d foam pads onto the oval.%3CBR%3E13.Use 3d foam pads and mount three jelly tots down the right hand side of the craft panel.%3CBR%3E14.Embellish your card with gems and glitter glue.%3CBR%3E~~~~~~~(default)~0~0~0,0,0|0,0~0~si1~~~~0~0~0~~~~~~~~Left~~~popWin=0~-1~0~Instructions for reindeer card 2~[~~]~[~~]~[~~]~1~~~~

2JB_~14588~20029~~~10~~~~~(default)~0~0~0,0,0|0,0~0~sp525~sp444~~~0~0~0~~images/wood-rudolph.gif~~~~~~~~~popWin=0~-1~0~Rudolph clear stamps~[~*Rudolph clear stamps|wood/rudolph|10|0|0||0|||1||12450|~]~[~~]~[~~]~1~~293~449~